Bewerken: ActionField1705

Sectie: XML

Reden:

## XML

```xml
<Workflow Name="ActionField1705" Version="2025.07.28" WorkflowType="Standard" xmlns="urn:Ultimo.Framework.Workflow-mapping">
	<Security EditLevel="10" ViewLevel="20" UserContentLevel="30" />
	<Description>Create Equipment(ConfigurationItem) from a choosen Equipment.</Description>
	<Properties>
		<Property	Name="FromEquipment"						Type="Equipment"		Accessor="Root"		Direction="In" />

<Property	Name="EquipmentPrefix"						Type="UltimoString"		Accessor="Optional"	Direction="In"		Default="Empty"										Comment="With this string the EqupmentId will start" />
		<Property	Name="ExtraFieldsToCopy"					Type="List[String]"		Accessor="Optional"	Direction="In"															Comment="Indicate additional columns to be copied" />
		<Property	Name="GetNumberOfEquipments"				Type="Boolean"			Accessor="Optional"	Direction="In"		Default="True"										Comment="Set to True to enable changing the amount of records to create in the dialog" />
		<Property	Name="LengthOfSequenceNumber"				Type="Int16"			Accessor="Optional"	Direction="In"		Default="Empty"										Comment="This will be the lenght of te Eqmnumber" />
		<Property	Name="MaintenanceClassificationContexts"	Type="List[Context]"	Accessor="Optional"	Direction="In"		Default="MaintenanceClassificationContext.MT"		Comment="Only change MaintenanceClassification with these contexts" />
		<Property	Name="MaxNumberOfEquipments"				Type="Int32"			Accessor="Optional"	Direction="In"		Default="999"										Comment="Set the maximum of equipment that can be created in one run" />
		<Property	Name="MntcSelectionListConfiguration"		Type="String"			Accessor="Optional"	Direction="In"		Default="Default"									Comment="Set the ViewFieldConfig for the MaintenanceClassification selection list" />
		<Property	Name="NewRecordStatus"						Type="Status"			Accessor="Optional"	Direction="In"		Default="EquipmentStatus.Active"					Comment="Set this status to the Equipment" />
		<Property	Name="PmWorkOrderContext"					Type="Context"			Accessor="Optional"	Direction="In"		Default="PmWorkOrderContext.PeriodicActivityChild"	Comment="Create PmWorkOrder with this context" />
		<Property	Name="SequenceStartNumber"					Type="Int32"			Accessor="Optional"	Direction="In"		Default="0"											Comment="With this Number the EqupmentId will start (greater than 0)" />

<Property	Name="CompleteSequenceNumber"				Type="UltimoString"		Accessor="Internal"						Default="Empty" />
		<Property	Name="CopyInstallDate"						Type="Boolean"			Accessor="Internal"						Default="False" />
		<Property	Name="CopyMaintenanceClassification"		Type="Boolean"			Accessor="Internal"						Default="False" />
		<Property	Name="CopyManufactureYear"					Type="Boolean"			Accessor="Internal"						Default="False" />
		<Property	Name="EquipmentContext"						Type="Context"			Accessor="Internal"						Default="${FromEquipment.Context}"					Comment="Necessary for label CREATEEQUIPMENT" />
		<Property	Name="EquipmentId"							Type="UltimoString"		Accessor="Internal"						Default="Empty" />
		<Property	Name="NumberOfEquipments"					Type="Int32"			Accessor="Internal"						Default="1" />
		<Property	Name="Range"								Type="List[Int64]"		Accessor="Internal"						Default="Empty" />
		<Property	Name="ToEquipment"							Type="Equipment"		Accessor="Internal" />
		<Property	Name="UseAutoKey"							Type="Boolean"			Accessor="Internal" />
	</Properties>
	<Execution>
		<UserContent Name="Pre" />

<Dialog Name="CreateEquipment_FromEquipment" TitleCode="CREATEEQUIPMENT">
			<Container Border="True">
				<Number Name="NumberOfEquipments" Width="85" Visible="=${GetNumberOfEquipments} == True" Value="${NumberOfEquipments}" OutputProperty="${NumberOfEquipments}" LabelCode="NUMBEROFEQMS" MinValue="1" MaxValue="${MaxNumberOfEquipments}" DecimalPrecision="0" />

<CheckBox Name="ManufactureYear" Visible="=${FromEquipment.ManufactureYear} != 0" Value="${CopyManufactureYear}" OutputProperty="${CopyManufactureYear}" LabelCode="YEAR_OF_CONSTRUCTION" />

<CheckBox Name="InstallDate" Visible="=${FromEquipment.InstallDate} != Empty" Value="${CopyInstallDate}" OutputProperty="${CopyInstallDate}" LabelCode="INSTALLATION_DATE" />

<CheckBox Name="MaintenanceClassification" Visible="=${FromEquipment.MaintenanceClassification} != Empty" Value="${CopyMaintenanceClassification}" OutputProperty="${CopyMaintenanceClassification}" LabelCode="MAINTENANCECLASSIFICATION2" />
			</Container>
		</Dialog>

<Transaction>
			<Command Name="HasAutoKey" CommandName="HasAutoKey">
				<Parameter	Name="EntityName"	Direction="In"		Value="Equipment" />
				<Parameter	Name="HasAutoKey"	Direction="Out"							OutputProperty="${UseAutoKey}" />
			</Command>

<Assign Name="Set range based on NumberOfEquipments" Property="${Range}" Value="=#range(1, ${NumberOfEquipments})" />

<ForEach Name="Item" In="${Range}" As="Item">
				<UserContent Name="PreCreateEqm" />

<Choose Name="Check how EquipmentId must be generated">
					<When Name="SequenceStartNumber " Condition="${SequenceStartNumber} &gt; 0">
						<Assign Name="Set CompleteSequenceNumber" Property="${CompleteSequenceNumber}" Value="=#fillstart(${SequenceStartNumber}, '0', ${LengthOfSequenceNumber})" />
						<Assign Name="Set EquipmentId" Property="${EquipmentId}" Value="=#concat(${EquipmentPrefix}, ${CompleteSequenceNumber})" />
						<Assign Name="Add one to SequenceStartNumber" Property="${SequenceStartNumber}" Value="=(${SequenceStartNumber} + 1)" />

<Insert Name="Create Equipment with SequenceStartNumber" ObjectType="Equipment" OutputProperty="${ToEquipment}">
							<Parameter	Name="Context"	Direction="In"		Value="EquipmentContext.None" />
							<Parameter	Name="Status"	Direction="In"		Value="EquipmentStatus.None" />
							<Parameter	Name="Id"		Direction="In"		Value="${EquipmentId}" />
						</Insert>
					</When>

<When Name="Autokey is enabled" Condition="${UseAutoKey} == True">
						<Insert Name="Create Equipment with autokey" ObjectType="Equipment" OutputProperty="${ToEquipment}">
							<Parameter	Name="Context"	Direction="In"		Value="EquipmentContext.None" />
							<Parameter	Name="Status"	Direction="In"		Value="EquipmentStatus.None" />
						</Insert>
					</When>

<Otherwise Name="Autokey is disabled">
						<Command Name="InsertAndGenerateId" CommandName="InsertAndGenerateId">
							<Parameter	Name="EntityContext"	Direction="In"		Value="EquipmentContext.None" />
							<Parameter	Name="EntityName"		Direction="In"		Value="Equipment" />
							<Parameter	Name="CreatedObject"	Direction="Out"										OutputProperty="${ToEquipment}" />
						</Command>
					</Otherwise>
				</Choose>

<Assign Name="Set CopyFromEquipment" Property="${ToEquipment.CopyFromEquipment}" Value="${FromEquipment}" />
				<Assign Name="Copy IndividualPM" Property="${ToEquipment.IndividualPM}" Value="${ToEquipment.CopyFromEquipment.IndividualPM}" />

<Command Name="Copy equipment" CommandName="Equipment_Copy">
					<Parameter	Name="CopyInstallDate"					Direction="In"		Value="${CopyInstallDate}" />
					<Parameter	Name="CopyMaintenanceClassification"	Direction="In"		Value="${CopyMaintenanceClassification}" />
					<Parameter	Name="CopyManufactureYear"				Direction="In"		Value="${CopyManufactureYear}" />
					<Parameter	Name="ExtraFieldsToCopy"				Direction="In"		Value="${ExtraFieldsToCopy}" />
					<Parameter	Name="ToEquipment"						Direction="In"		Value="${ToEquipment}" />
				</Command>

<Flush Comment="This flush is nescessary because the updates on the new Equipment must be in the DB." />

<When Name="Copy MaintenanceClassification" Condition="${CopyMaintenanceClassification} == True">
					<WorkflowCall Name="ChangeMaintenanceClassification" WorkflowName="Equipment_ChangeMaintenanceClassification">
						<Parameter	Name="AutoAnswerMaintenanceClassification"					Direction="In"		Value="${FromEquipment.MaintenanceClassification}" />
						<Parameter	Name="AutoAnswerQuestionChangeMaintenanceClassification"	Direction="In"		Value="Yes"											Comment="No question allowed inside current transaction" />
						<Parameter	Name="Equipment"											Direction="In"		Value="${ToEquipment}" />
						<Parameter	Name="MaintenanceClassificationContexts"					Direction="In"		Value="${MaintenanceClassificationContexts}" />
						<Parameter	Name="MergeFeatures"										Direction="In"		Value="True"										Comment="Preserve existing equipment features" />
						<Parameter	Name="MntcSelectionListConfiguration"						Direction="In"		Value="${MntcSelectionListConfiguration}" />
						<Parameter	Name="PmWorkOrderContext"									Direction="In"		Value="${PmWorkOrderContext}" />
						<Parameter	Name="ShowResultMessage"									Direction="In"		Value="False"										Comment="No message allowed inside current transaction" />
					</WorkflowCall>
				</When>

<Assign Name="Reset CopyFromEquipment" Property="${ToEquipment.CopyFromEquipment}" Value="Empty" />

<When Name="Check new status » New status passed" Condition="${NewRecordStatus} != EquipmentStatus.None">
					<ChangeStatus Name="Change status" DomainObject="${ToEquipment}" NewStatus="${NewRecordStatus}" />
				</When>

<UserContent Name="PostCreateEqm" />
			</ForEach>
		</Transaction>

<UserContent Name="Post" />

<Message Name="MessageWithNumberOfEquipmentsCreated" MessageCode="2610">
			<Parameter	Name="EquipmentContext"		Direction="In"		Value="${FromEquipment.Context}" />
			<Parameter	Name="NumberOfEquipments"	Direction="In"		Value="${NumberOfEquipments}" />
			<Parameter	Name="ProductDossier"		Direction="In"		Value="0" />
		</Message>
	</Execution>
</Workflow>
```